HD Control Arm Pro’lignment Kit, JL Wrangler | JT Gladiator

1,296.00 SAR

طقم محاذاة أذراعة التحكم الأمامية 

MetalCloak’s Jeep JL Wrangler and JT Gladiator Front Control Arm Drop Bracket corrects the control arm angle and caster for 2.5″, 3.5″, and 4.5″ lift heights. Brackets allows the use of factory/non-adjustable control arms or aftermarket adjustable control arms.

Features Include:

  • Flattened Control Arm Angles
  • Corrected Caster
  • Improved Braking Performance
  • 3/16″ Steel Plate Fully Welded 1 Piece Design
  • Gusseted And Boxed-In For Strength
  • Gold Zinc Plated
  • Skid Washers
  • All Hardware Needed
  • Bolts Directly Into Factory Location
  • Made in the USA

Improve the drivability in you lifted Jeep by reducing the angle of your control arms AND correct the caster issues if using factory control arms. The gusseted, solid-welded, 1 piece 3/16″ steel plate brackets ensure strength where you need it.

Multiple hole locations for control arms allow use on lift heights from 2.5″ to 4.5″ even if re-using factory control arms; this works great with aftermarket control arms also to flatten the angle. Bolts into factory locations for ease of installation and is gold zinc plated for a durable, long lasting finish.

None: Due to a frame bracket change the HD Control Arm Pro’lignment Kit will not work on 2024+ JL Wranglers or JT Gladiators.

None: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.

HD Control Arm Pro’lignment Kit, JL Wrangler | JT Gladiator